4:1 shrink ratio allows a few sizes to cover a wide range of splice and components diameters, mechanically tough tubing provides strain relief and abrasion protection of wire splices, terminals, and other components, adhesive-lined against fluids, moisture and other contaminants.
Features.-
-
4:1 very high shrink ratio
-
Longitudinal shrink 8% max
-
Out jacket flame retardant
-
Continuous operating temperature: -45 oC to 125 oC
-
Shrink temperature: 120 oC
Dimensions
|
|
SIZE |
AS SUPPLIED |
AFTER RECOVERY |
STANDARD PACKAGE
(m/pc) |
|
Inch |
mm |
INTERNAL DIAMETER |
INTERNAL DIAMETER |
TOTAL WALL
THICKNESS |
WALL THICKNESS
OF ADHESIVE |
|
1/4 |
6.0 |
6.0 |
1.27 |
1.30 ± 0.15 |
0.56 ± 0.15 |
1.22 |
|
5/16 |
8.0 |
8.0 |
1.65 |
1.65 ± 0.15 |
0.76 ± 0.15 |
1.22 |
|
1/2 |
12.0 |
12.0 |
2.41 |
2.00 ± 0.15 |
1.02 ± 0.15 |
1.22 |
|
3/4 |
18.0 |
18.0 |
4.45 |
2.50 ± 0.15 |
1.37 ± 0.15 |
1.22 |
Technical Data
|
|
Property |
Test Method |
Typical Performance |
|
Tensile Strength (MPa) |
ASTM D2671 |
≥12 |
|
Elongation (%) |
ASTM D2671 |
≥300 |
|
Tensile Strength after Heat Aging (MPa) |
UL 224 158 oC x 168 hrs |
≥ 7.3 |
|
Elongation after Heat Aging(%) |
UL 224 158 oC x 168 hrs |
≥ 200 |
|
Dielectric Strength (Kv/mm) |
IEC 243 |
≥ 15 |
|
Volume Resistivity (Ωxmm) |
ASTM D876 |
≥ 1x1014 |
Hot Melt Adhesive Property
|
|
Property |
Test Method |
Typical Performance |
|
Water Absoption |
ASTM D750 |
≤ 0.2% |
|
Softening Point |
ASTM E8 |
95 oC |
|
Strength of Pearing (PE) |
ASTM D1000 |
120N/25mm |
|
Strength of Pearing (AL) |
ASTM D1000 |
80N/25mm |
Download of Catalogs
Cables and Wires
Heat Shrinkable Tubing
Power Cable Accessories->
Featured Products ...
