Heat shrinkable tubing and adhesive liner combination that established the CATV standard for splice and connectror protection.
Features.-
-
An absolutely waterproof seal
-
Selective strippability to meet CATV industry specifications
-
Minimal heat required to produce error-free installation without splitting
-
Themocromaticpaint ensures integrity of seal
-
Continuous operating temperature: -45 oC to 125 oC
-
Shrink temperature: 125 oC
Dimensions
|
SIZE |
AS SUPPLIED |
AFTER RECOVERY (mm) |
STANDARD LENGTH
(m/spool) |
mm |
INTERNAL DIAMETER
(mm) |
INTERNAL DIAMETER
(mm) |
OUTER LAYER
WALL THICKNESS |
ADHESIVE LAYER
WALL THICKNESS |
TOTAL WALL
THICKNESS |
0400 (10.2/3.8) |
10.2 |
3.8 |
2.0 ± 0.20 |
0.40 ± 0.10 |
2.40 ± 0.25 |
1.22 |
0750 (19.0/5.6) |
19.0 |
5.6 |
2.0 ± 0.20 |
0.45 ± 0.10 |
2.65 ± 0.25 |
1.22 |
1100 (27.9/10.2) |
27.9 |
10.2 |
2.5 ± 0.20 |
0.50 ± 0.15 |
3.00 ± 0.25 |
1.22 |
1300 (33.0/10.2) |
33.0 |
10.2 |
2.6 ± 0.20 |
0.50 ± 0.15 |
3.10 ± 0.25 |
1.22 |
1500 (38.1/12.7) |
38.1 |
12.7 |
2.7 ± 0.20 |
0.50 ± 0.15 |
3.20 ± 0.25 |
1.22 |
1700 (43.2/12.7) |
43.2 |
12.7 |
2.7 ± 0.20 |
0.50 ± 0.15 |
3.20 ± 0.25 |
1.22 |
2050 (52.1/19.0) |
52.1 |
19.0 |
2.8 ± 0.20 |
0.50 ± 0.15 |
3.30 ± 0.25 |
1.22 |
2750 (69.8/25.4) |
69.8 |
25.4 |
2.8 ± 0.20 |
0.60 ± 0.15 |
3.40 ± 0.25 |
1.22 |
Technical Data
|
Property |
Test Method |
Typical Performance |
Tensile Strength (MPa) |
ASTM D2671 |
≥12 |
Elongation (%) |
ASTM D2671 |
≥300 |
Density (g/cm3) |
ASTM D792 |
1.2 |
Longitudinal change (%) |
UL 224 |
≤ ± 10 |
Elongation after Aging(%) |
UL 224 158 oC x 168 hrs |
≥ 200 |
Heat shock |
UL 224 225 oC x 4 hrs |
No cracking |
Dielectric strength (Kv/mm) |
IEC 243 |
≥ 20 |
Volume Resistivity (Ωxcm) |
ASTM D876 |
≥ 1x1014 |
Water Absoption |
ASTM D750 |
≤ 0.5% |
Hot Melt Adhesive Property
|
Property |
Test Method |
Typical Performance |
Water Absoption |
ASTM D750 |
≤ 0.2% |
Softening Point |
ASTM E28 |
95 oC |
Strength of Pearing (PE) |
ASTM D1000 |
120N/25mm |
Strength of Pearing (AL) |
ASTM D1000 |
80N/25mm |